![Some facts of pipes and water system issues](Public/images/019.jpg)
Worth to know
The pressure vessel of a boiler is usually made of steel (or alloy steel), or historically of wrought iron. Stainless steel, especially of the austenitic types, is not used in wetted parts of boilers due to corrosion and stress corrosion cracking.3 However, ferritic stainless steel is often used in superheater sections that will not be exposed to boiling water, and electrically-heated stainless steel shell boilers are allowed under the European "Pressure Equipment Directive" for production of steam for sterilizers and disinfectors.4
In live steam models, copper or brass is often used because it is more easily fabricated in smaller size boilers. Historically, copper was often used for fireboxes (particularly for steam locomotives), because of its better formability and higher thermal conductivity; however, in more recent times, the high price of copper often makes this an uneconomic choice and cheaper substitutes (such as steel) are used instead.
For much of the Victorian "age of steam", the only material used for boilermaking was the highest grade of wrought iron, with assembly by rivetting. This iron was often obtained from specialist ironworks, such as at Cleator Moor (UK), noted for the high quality of their rolled plate and its suitability for high-reliability use in critical applications, such as high-pressure boilers. In the 20th century, design practice instead moved towards the use of steel, which is stronger and cheaper, with welded construction, which is quicker and requires less labour. It should be noted, however, that wrought iron boilers corrode far slower than their modern-day steel counterparts, and are less susceptible to localized pitting and stress-corrosion. This makes the longevity of older wrought-iron boilers far superior to those of welded steel boilers.
Cast iron may be used for the heating vessel of domestic water heaters. Although such heaters are usually termed "boilers" in some countries, their purpose is usually to produce hot water, not steam, and so they run at low pressure and try to avoid actual boiling. The brittleness of cast iron makes it impractical for high-pressure steam boilers.
Źródło: https://en.wikipedia.org/wiki/Boiler#Materials
A comprehensive renovation of bathrooms
A comprehensive bathroom renovation is done by a plumber. The need for its implementation may be due to a failure by which the bathroom was flooded, or simply the desire to renew the bathroom and fitted on the new devices. In the course of such repair can be removed spa bathrooms and install in its place a shower. If the bath was in the bathroom for many years, it may be that the installation of the shower will need replacing water drainage pipes and installing in their place new ones that ensure good water flow from the shower. You will also be able to move to another location sink in the bathroom, and hence, installed in an existing network plumbing new connections.
The consequences of flooding the bathroom
As a result of some failure of the hydraulic bath may be flooded by the water. In this situation, you may find that it is not enough to carry out repair broken equipment or perform fill the hole formed in one of the pipes, but we will have to dry the bathroom, namely the floor. Thorough repair and plumbing services include replacement of defective devices and remove flooded bathroom tiles that will be replaced. It will also be a good opportunity for this to change some colors of your bathroom, by lining it with new tiles. Such work can be carried out by a plumber-Tile Fitter, who is a real expert in this field.